Description The Spectra HV302 is a high quality and high accuracy multi-function laser level, which will fulfil almost any function required of a laser level on site. The laser level is fully automatically self-levelling and can be used in the horizontal or vertical plane. A 90° laser beam enables plumb-point transfer and 90° layout. The extraordinarily rugged construction has a design expectation of being able to withstand a 1m drop onto concrete, or a standard height tripod tip-over. The Spectra HV302 can be used with any Spectra Laser Receiver: HR320 is the basic receiver HL450 advanced receiver with digital height difference readout HL760 radio-linked digital read-out receiver for automatic Grade Match and planeLok. Automatic Grade Matching, which is very useful for drainage work, is done with the optional Spectra HL760 Laser Receiver and Remote Control. The laser level scans up or down to find the laser receiver at its set height, and a radio link between the two enables the laser to be set to the required slope. This is much faster and more accurate than trying to manually set the laser to the required slope. The PlaneLok function available with the HL760 Receiver and Remote Control is used to lock the laser beam in alignment with the target point – especially useful for vertical cladding applications. The Spectra HV302 will operate over 800m diameter with the HL450 or HL760 long range digital read-out laser receivers. Key Features of the Spectra HV302 Automatic horizontal and vertical self-levelling Very high accuracy 1.5mm / 30m Working range with optional receiver: 800m Highly visible beams for indoor working without a receiver 90° laser beams for setting out Plumb beam Variable speed laser rotation Zone scanning for very bright laser line in work zone Beam slope function Automatic slope and grade matching with optional remote control and receiver long range (100m) radio remote control available 5 years warranty The high visibility HV302 laser makes this the ideal laser level for interior contract works such as suspended ceiling installation. The laser beam can be set for continuous rotation or localised very bright zone-scan. Set out 90° layouts, horizontal and vertical lines on walls, floor and ceiling with the Spectra HV302 The Spectra HV302 may be used to set out 90° on the floor, and horizontal and vertical setting out lines in all general construction applications. Set out slopes using either the instrument keypad or the optional remote control. With the optional remote control and radio-linked HL760 receiver, the Spectra HV302 can be used to automatically grade match slopes; the laser is held at the required height and the laser automatically sets to the required grade.
